The lane subassembly will drop in at that point. As an example, select the LaneSuperelevationAOR (check your properties) and select the connection point. Now you’re ready to begin adding components to your assembly. There are a number of pre-set assemblies as well.īefore you begin building your Assembly, verify your units! Check the Properties pallet on the right to make sure you have the right slope, width, depth parameters selected! The Assembly Tab has all the tabs necessary to build your assembly including Medians, Curbs, Daylight, Trenching, etc. Note: Within Civil 3D, you can right-click on the left side to see all the standard pallets. The point node will connect with your profile or cross-section, so build from that point. Once you click Ok, Civil 3D will ask where you would like to place the baseline for the assembly (pick a spot on your model) and a red center line and yellow point node will appear on the screen-this is your Baseline. There are also Styles and Code Sets and Assembly Layer. Civil 3D provides a number of Assembly Types as well (e.g., Undivided Crowned Road, Railway). Assembly names are typically associated with the corridor (e.g., Collector-Full). To create an Assembly, go to the Home Tab and Click Assembly, Create Assembly. They can be shared from project to project, and inserted like Lego building blocks into a design to create a corridor. On a road design, for instance, you will likely need multiple assemblies to reflect the changes in curbs, sidewalks, lanes, and shoulders along the path.Īssemblies are created and stored in the TOOLSPACE tab of Civil 3D. While the alignment and profile provide the horizontal and vertical aspects of the corridor, the assembly is a bit more complex.Īssemblies are a collection of subassembly objects that reflect the design cross-sections at various points along a corridor. A corridor can be any linear feature such as a road, harbor channel, railway line, or pipeline right of way, etc.Įvery corridor combines an alignment, a profile, and assemblies to form a 3D representation. Basically, a corridor is a 3D representation of a path. The term corridor is pretty familiar to Civil 3D users-and its purpose is powerful.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |